Advanced 3 Ton Trench Roller for Narrow Area Work Featuring Easy-Turn Technology and Labor-Saving Armrest Design

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Type: Road Roller
• Working Method: Wheeled
• Axle: Biaxial Dual-Drum
• Grinding Wheel Type: Tire Grind
• Engine Type: Diesel Engine
• Certification: CE
• Condition: New
• Overall Length: 1480mm
• Working Width: 810mm
• Overall Height: 1130mm
• Drum Diameter: 380mm
• Full Width: 750mm
• Full Length (with Armrests Flat): 2500/1800mm
• Full Height (Armrest Upright): 1140/1710mm
• Package Dimensions: 1320*700*1730mm
• Drum Width: 680mm
• Wheel Base: 650mm
• Drive: 650mm
• Output Power: 9.7kw
• Rating Speed: 3600rpm
• Vibration Frequency: 65Hz
• Machinery Test Report: Provided
• Transport Package: Standard
• Specification: Standard
• Trademark: GOODSENSE
• Origin: Taizhou, Zhejiang

Product Description

Product Description

VIBRATORY ROLLER

CAUTION: Read safety and operating instructions carefully before using this equipment for the first time! And keep this manual for future reference.

 

1. Foreword

Thanks for purchasing our product.

This manual provides information and procedures with safety operations and maintenance for the model. For your own safety and protection from injury, carefully read, understand and observe the safety instruction described in this manual.

   Keep this manual or a copy of it with the machine. If you lose this manual or need an additional copy, please contact Corporation. This machine is built with user safety in mind; however, it can present hazards if improperly operated and serviced. Follow operating instruction carefully! if you have questions about operating or servicing this equipment, please contact Corporation. This information contained in this manual was based on machine in production at the time of publication. Corporation reserves the right to change any portion of this information without notice. All rights, especially copying and distribution rights are reserved. Nor part of the publication may be reproduces in any form or by any means, electronic or mechanical, including photocopying, without express written permission from Corporation. Any type of reproduction or distribution not authorized by Corporation represents an infringement of valid copyrights and will be prosecuted. We expressly reserve the right to make technical modifications, even without due notice, which aim at improving our machine or their safety standards.

2.  Safety information

This manual contains DANGER, WARNNING, CATION, and NOTE callouts which must be followed to reduce the possibility of personal injury, damage to the equipment, or improper service.

2.1 Operating Safety

Familiarity and proper training are required for the safe operation of equipment. Equipment operated improperly or by untrained personal can be dangerous. Read the operating instructions contained in both this manual and the engine manual and familiarize yourself with the location and proper use of all controls. Inexperienced operators should instruction from someone familiar with the equipment before being allowed to operate the machine.

2.1.1ALWAYS disengage and stow the locking bar for the articulated steering joint before operating the machine. The machine cannot be steered when the locking bar is engaged.

2.1.2 ALWAYS check that all controls are functioning property immediately after start-up !

DO NOT operate the machine unless all controls operate correctly.

2.1.3 ALWAYS remain aware of changing positions and the movement of other equipment and personal on the job site.

2.1.4 ALWAYS remains seated at all times while operating the machine.

2.1.5 ALWAYS remain aware of changing surface conditions and use extra care when operating over uneven ground, on hills, or over soft or coarse material. The machine could shift or slide unexpectedly. 

2.1.6 ALWAYS use caution when operating near the edges of pits, trenches or platforms. Check to be sure that the ground surface is stable enough to support the weight of the machine with the operator and that there is no danger of the roller sliding, falling, or tipping. 
2.1.7 ALWAYS wear protective clothing appropriate the job site when operating equipment..
2.1.8 ALWAYS keep hands, feet, and loose clothing away from moving parts of the machine. 
2.1.9 ALWAYS read, understand, and follow procedures in the Operator's Manual before attempting to operate the equipment.
2.1.10 ALWAYS store the equipment properly when it is not being used. Equipment should be stored in a clean ,dry location out of the reach of children.
2.1.11 ALWAYS operate the machine with all safety devices and guards in place and in working order. 
2.1.12 NEVER allow anyone to operate this equipment without proper training. People operating this equipment must be familiar with the manual..
2.1.13 NEVER touch the engine or muffler while the engine is on or immediately after it has been turned off. These areas get hot and may cause burns. 
2.1.14 NEVER use accessories or attachments that are not recommended by . Damage to equipment and injury to the user may result.
2.1.15 NEVER leave machine running unattended. 
2.1.16 NEVER operate the machine with the fuel cap loose or missing. 
2.2 Operator Safety while using internal Combustion Engines

Specification

Operating Weight
Dry Weight	800	Kg
Static linear load	57/77	N/CM
Size
Working width	875	MM
Machine length ( DUMP / Establishment )	1550	MM
Height of the machine ( DUMP / Establishment )	1210	MM
Outside turning radius	2300	MM
Width of steel wheel	700before 500after	MM
Diameter of steel wheel	530before 425after	MM
Wheel tread	1100	MM
Engine
Engine make	CHANGFA
Engine Model	180F
EngineType	4-stroke single cylinder, air cooled
Cylinders	1
Output power	7	HP
Speed	3600	RPM
Battery	12	V
driving means	Two-way hydraulic & chain drive

Walking characteristic
Travel speed	0-1.4	M/S
Grade ability	30	%
Brake
Service brake	Variable displacement pumps
Turn
Steering	Mechanicalsteering
Steering system	Rear wheel steering
Excitation system
Vibration steel wheel	Before
Drive type	Mechanical transmission Electromagnetic clutch
Vibration frequency	70	Hz
Vibration amplitude	0.5	Mm
Exciting force	30	KN
Sprinkler system
Style	Gravity-type water
Capacity
Hydraulic pillow	12	L
Fuel oil	6.5	L
Water	18	L

Compay Profile

FAQ

Please enter the title here

Q: How long is the validity of quotation?
A: Generally,our price is valid within one month from the date of quotation .The price will be adjusted appropriately according to the price fluctuation of raw material and changes in market. 

Q: What is your delivery time? 
A:The delivery time is around 15 working days. In peak season, the production time would take longer.

Q: What is the payment term? 
A:Normally we accept T/T,L/C etc.

Q:Do you have CE certificate?
A:Yes, most of our products have the CE certificate.

Q:How can we ensure quality? 
A:The final inspection is always carried out before shipment.

Q: How to install the equipment after purchasing?
A:We will provide professional installationvideo to illustrate.Also provide manual.

Q:What is your MOQ? 
A:The MOQ is 1 Set.